MIRAGE HIBOY ROADSTER

The Mirage Hiboy Roadster package features a fiberglass hiboy roadster body from Greeneing Auto Co., custom frame rails by Thunder Road Rod & Custom, and of course, Kugel Komponents fully Independent Suspensions.

*Includes body (features include: 2” raised rear wheel wells, doors & cock pit extended 3”, straightened lower body line, ¾” channel at cowl, fiberglass hood top & 2” shortened grill shell), custom frame with center section (no motor or trans mounts or brake pedal assembly), Kugel Komponents outboard coilover hiboy show model IFS installed & Kugel Komponents 9” Ford with regular housing, plain 3rd member, open gear, single shock show model IRS installed.

PRICE BREAKDOWN:
  • Body Only = $9,000.00 (includes S&H to CA)
  • IFS = $5,300.0
  • IRS = 7,520.00
  • Bare Frame = $4,400.00.
OPTIONS & UPGRADES ON IFS:
  • Upgrade to Pushrod Style IFS - $700.00
  • Drilled & Slotted Rotors - $200.00
  • 13” Drilled & Slotted Rotors & 6 Piston Wilwood Calipers – Show Model - $1,600.00
OPTIONS & UPGRADES TO IRS:
  • Upgrade to Quick Change IRS - $4,000.00 (Show Only)
  • Change Wheel Bolt Pattern from Chevy to Ford - $100.00
  • Polished Aluminum 3rd Member - $950.00 (For 9” Ford IRS)
  • New Style Housing - $400.00 (For 9” Ford IRS)
  • Limited Slip Differential - $475.00 (For 9” Ford IRS)
  • Rear Sway Bar - Show - $575.00
  • Drilled & Slotted Rotors - $200.00
  • Stainless Steel Hoses, Junction Block Kit & Bleeder Hoses - $120.00
  • Single E-Brake, Plain - $250.00 / Show - $400.00
  • Dual E-Brake, Plain - $500.00 / Show - $800.00
  • Extreme Duty Stainless Steel Control Arms, Show - $450.00
OPTIONS & UPGRADES TO CHASSIS:
  • Engine & Trans (supplied by customer, standard small block Ford or Chevy & standard auto trans) Installed - $500.00
  • Brake Line System (s/s lines) Installed - $1,300.00
  • Exhaust System (includes headers, mufflers, HPC coated m/s, no tips) - $5,000.00
  • Upgrade to Stainless Steel Polished Materials - $2,500.00
  • Additional Shop Work Available.
OPTIONS & UPGRADES TO BODY:
  • Flaming River Tilt Steering Column (plain s/s) w/ 2 U-Joints & Shaft (plain) Installed - $1,800.00
  • Steel Grill Shell – Shortened & Chopped - $600.00
  • Dan Fink Classic II Grill Insert - $1,000.00
  • Aluminum Hood Top & Sides w/Hinge Kit Installed (flat sides) - $4,500.00
  • 90° Brake Pedal Assembly Installed (includes aluminum brake m/c) - $1,000.00
  • Mattson’s Aluminum Radiator & Fan - $1,100.00
  • Hard Stainless Steel Water Lines Installed - $800.00
  • Stainless Steel Gas Tank Installed - $1,000.00
  • Fuel Line System Installed (s/s lines, pump, filter) - $2,500.00
  • Battery Installed in Trunk - $500.00
  • Kugel-Muroc Style Windshield Installed - $3,500.00
Copyright © 2010 Kugel Komponents .
Site design, maintance by Pixel Playground.