model number
|
description
|
cost
|
| 200 |
Kugel IRS 9" ford std |
$4,695.00 |
| 201 |
Kugel IRS 9" ford with high output hubs |
$5,195.00 |
| OPTIONS FOR THE 9" FORD IRS |
| IRS1 |
Polished aluminum third member & chrome u-joint yoke |
$750.00 |
| IRS2 |
Cast stainless steel control arms |
$850.00 |
| IRS3 |
Tubular stainless steel control arms |
$400.00 |
| IRS4 |
Billet aluminum control arms |
$700.00 |
| IRS5 |
Limited slip differential |
$400.00 |
| IRS6 |
Torque arrest™ radius rod and frame bracket kit |
$200.00 |
| IRS7 |
2 additional coil over shocks with springs (for heavier cars) |
$425.00 |
| IRS8 |
Single emergency brake |
$140.00 |
| IRS9 |
Dual emergency brake |
$280.00 |
| IRS10 |
Stainless steel hose & junction block kit |
$100.00 |
| IRS11 |
Single pull e-brake lever kit (for dual e-brakes) |
$120.00 |
| POLISH & CHROME UPGRADES |
| IRS16 |
Stage 1 - Polished finned aluminum housing, calipers, control arms, adjusters, rear tie bar, thru bolts, shocks & springs (2 or 4) |
$795.00 |
| IRS17 |
Stage 2 - Stage 1 plus polished outer hub uprights, chrome caliper brackets and slider bolts, control arm pivot plate, axle retainers, half shafts, yokes & flanges, straps, u-joint dress-up caps, front tie bar, pinion support rods & Torque Arrest™ radius rods. |
$1,495.00 |
| EXTRA POLISH & CHROME - Note: Most of this is not seen from the rear of the car. The chroming & polished prices are for labor only, they do not include the cost of the optional items |
| IRS20 |
E-brake caliper and bracket - single |
$75.00 |
| IRS21 |
E-brake caliper and bracket - dual |
$150.00 |
| IRS22 |
Polished single pull e-brake lever kits |
$90.00 |
| IRS23 |
Chrome u-joint centers |
$100.00 |
| IRS25 |
Chrome inner stub axles |
$150.00 |
| IRS26 |
Chrome Outer Bearing Assembly |
$250.00 |
| QUICKCHANGE IRS |
| 220 |
Kugel quickchange IRS |
$7,995.00 |
| 221 |
Kugel quickchange IRS with high output hubs |
$8,495.00 |
| OPTIONS FOR THE QUICKCHANGE IRS |
| QC1 |
Cast stainless steel control arms |
$850.00 |
| QC1B |
Billet control arms |
$700.00 |
| QC2 |
Tubular stainless steel control arms |
$400.00 |
| QC3 |
Limited slip differential (standard) |
|
| QC4 |
Torque Arrest™ radius rod and frame bracket kit |
$200.00 |
| QC5 |
2 additional coil over shocks with springs (for heavier cars) |
$390.00 |
| QC6 |
Single emergency brake |
$140.00 |
| QC7 |
Dual emergency brake |
$280.00 |
| QC8 |
Stainless steel hose & junction block kit |
$100.00 |
| POLISH & CHROME UPGRADES FOR QUICKCHANGE IRS |
| QC16 |
Stage 1 - Polished center section and side plates, calipers, caliper brackets, lower arms, adjusters, rear tie bar, shocks & springs (2 or 4) |
$795.00 |
| QC17 |
Stage 2 - Stage 1 plus polished outer hub uprights, control arm brackets, rotor hats, chrome halfshafts, yokes, flanges, front tie bar, pinion supprot rods, dress-up caps, center section thru bolts, crossmember brackets and hardware |
$1,695.00 |
